|
| |
|
|
• Hand Pumps |
• Radial Piston Pumps |
• Bellhousing Assembly |
• Pressure Relief Valve |
• Pressure Control Valve |
• Level Operated Directional Control Valve |
• Solenoid Operated Directional Control Valve |
• Flow Control Valve |
• Check Valve |
• Pressure Switch |
|
| |
PUMP |
Hand Pumps - HP12 & HP16 |
| |
Heavy duty construction. Renewable internal parts by replacement. Integral Relief and Release valves. Collapsible hand movement at low pressure. |
| |
Nominal flow and pressure ratings |
Model |
Max. working
pr. (bar) |
Flow capacity
c.c./stroke |
Oil tank
capacity (ltrs.) |
HP12
HP16
HP12-1000 |
700
350
1000 |
2.8
5
2.8 |
1.2 |
|
|
|
| |
|
|
| Feed and Power Hand Pumps - HP5012 & HP5016 |
| |
| |
Automatic change-over from high discharge at low pressure to low discharge at high pressure. Renewable internal parts by replacement. Collapsible Hand lever for compact size and short hand movement. |
| |
Nominal flow and pressure ratings |
Model |
Maximum
working
pr. (bar) |
Flow capacity
upto 30 bar
c.c./stroke |
Flow capacity
above 30 bar
c.c./stroke |
Oil tank
capacity (ltrs.) |
HP5012 |
700 |
49 |
2.8 |
13 |
|
|
|
| |
|
|
| Radial Piston Pumps - 1R / 1RE |
| |
| |
Rugged low cost pumps with all parts renewable by replacement. Radial piston arrangement, with 3, 5 or 7 pumping elements. Oil immersed type, open execution, face mounting, valve controlled, fixed delivery, bi-directional rotation of shaft. Also available with extension shaft / bracket for through drive. For coupling the pumps to the electric motors standard bell housing assemblies are available. These are also available with extension shaft to couple low pressure pumps. |
| |
Nominal pressure and flow ratings |
Pr. bar |
550 |
450 |
350 |
300 |
250 |
200 |
No. of Pumping
Elements |
Flow (l / min) @ 1450 rpm |
A |
B |
C |
D |
E |
F |
3 |
1.5 |
2.5 |
3.7 |
4.3 |
5 |
5.8 |
5 |
2.6 |
4.2 |
6.2 |
7.2 |
8.4 |
9.7 |
7 |
3.7 |
5.8 |
8.6 |
10 |
11.7 |
13.6 |
|
|
|
| |
|
|
|
| |
| |
Pressure Controls |
Direct Operated Pressure Relief Valve - DPR |
| |
| |
Direct acting with guided cushioned poppet. Available in Cartridge, Threaded and Subplate types. |
| |
Nominal pressure and flow ratings |
Model |
Max. working
pr. (bar) |
Max. flow
in l / min |
DPR 06 |
700 |
30 |
DPR 10 |
400 |
80 |
DPR 20 |
400 |
160 |
|
|
|
| |
|
|
| Pilot Operated Pressure Relief Valve (Modular Construction) - MPPR 06 |
| |
| |
Pilot operated pressure relief valve modular construction for vertical stacking assemblies. |
| |
Nominal flow and pressure ratings |
| Max. flow handling capacity |
30 l/min. |
| Max. setting pressure |
315 bar |
| Max. working pressure |
315 bar |
|
|
|
| |
|
|
| Pressure Control Modules - PCM 06-06 |
| |
| |
Designed to control double pumps of a Hi-Low system. Unloads low pressure pump when system pressure rises above the pressure set on unloader valve. Relieves high pressure pump when system pressure reaches the value. |
| |
Nominal flow and pressure ratings |
Model |
Max. pr. for
High pr. relief
(bar) |
High pr.
Flow (l/min) |
Max. pr. For
unloading
(bar) |
Low pr.
Flow
(l/min) |
PCM 06-06 |
400 |
25 |
50 |
25 |
|
|
|
| |
|
|
| |
| |
Direction Control |
| Solenoid Operated Directional Control Valve (CETOP 03) - DE 06 (315 bar, 63 lpm) |
| |
Direct solenoid operated, spool type, mounting on ISO 4401-03-02.
Five chamber body and spool design provides low-pressure drop, with maximum performance. Balanced spool design ensures proper shifting force for maximum reliability and long life. All spools and bodies are interchangable, simplifying maintenance. Wet pin DC solenoids ensure better heat dissipation, quitter operation, there by increasing solenoid life. Moulded solenoid coils eliminate moisture problems and ingress of dust. Plug-in-coils for ease of maintenance. Indicator lights are a standard option.
|
| |
|
|
| |
|
|
| Solenoid Operated Directional Control Valve (CETOP 05) - DE 10 (315 bar, 120 lpm) |
| |
4-port, spool type, solenoid operated, directional control valves with wet armature AC or DC coils and wide variety of spool types with spring centered and spring-offset arrangements.
|
| |
| • |
Five chamber body and spool design to facilitate high flow. |
| • |
Conforms to ISO4401-5, NFPA T3.5.1M R1 and ANSI B93-7 D 05 interface. |
| • |
Available in 52 standard, interchangeable spool configurations. |
| • |
Removable wet-armature AC and DC solenoids for quick replacement and conversions. Moulded solenoid coils to protect against moisture and ingress of dust. |
| • |
Individual solenoid plug-in connectors with indicator lights to ISO 4400 and DIN 43650. |
| • |
Special R-rings for high extrusion resistance. Increased stability under high dynamic condition. |
| • |
Override for operation of valve without electrical power. |
|
|
|
| |
|
|
| |
| |
Flow Controls |
| Throttle / Check Valve (Modular) - TCM 06 |
| |
Double throttle cum check, non pressure compensated, modular construction. Can be used as Metering-in or Metering-out device.
|
| |
| |
|
|
| |
|
|
| |
| |
|
Check Valve |
| Check Valve - C |
| |
These seat type valves allow free flow from port A to port B and give leak-proof closure in opposite direction. Available as inline mounting or Sub-plate mounting as per factory & ISO standards.
|
| |
Nominal flow and pressure ratings |
Model |
C06 |
*C08 |
C10 |
*C15 |
C20 |
*C25 |
C30 |
Max. working
pr. (bar) |
315 |
315 |
315 |
315 |
315 |
315 |
315 |
Max. flow
l/min. |
10 |
20 |
30 |
80 |
120 |
220 |
280 |
* : Available only in threaded type |
|
|
|
| |
|
|
Check Valve - CI |
| |
Seat type valves, Model CI with internal drain. Threaded or Sub-plate mounting construction. Available with two pilot piston size options only for Model CI.
|
| |
Nominal flow and pressure ratings |
Model |
Max. working
pr. (bar) |
Max. flow
l/min. |
CI10 |
315 |
80 |
CI20 |
315 |
160 |
CI30 |
315 |
350 |
|
|
|
| |
|
|
| Pilot operated check valve (Modular) - CIM 06 |
| |
These modular valves are available with the pilot operated check valve facility on either 'A' or 'B' ports. The hydraulic opening operation for free flow in reverse direction is achieved by means of internal pilot pressure available from the other working port. Interface conforming to
ISO 4401-AB-03-04-A
IS 10187
DIN 24340
To ensure proper closure of both valve poppets, both user connections should be unloaded when the control valve is in the neutral by connecting with the return line.
|
| |
Nominal flow and pressure ratings |
Model |
Max. working
pr. (bar) |
Max. flow
in l/min. |
CIM 06 |
315 |
35 |
|
|
|
| |
|
|
| |
| |
| Pressure Switch - 1PS |
| |
Non adjustable differential type. Spring loaded sealed piston construction. Encapsulated design for protection against dust. Six pressure ranges available, which can be adjustable upto 10, 50, 100, 200, 350 and 420 bar. Transparent plug-in connector is available with LED |
| |
| Nominal flow and pressure ratings |
| Model |
Max. working
pressure |
Flow handling
capacity |
Filtration
capacity |
| RF |
7 bar |
40 l/min. |
25 microns |
|
|
|
|
| |
|
|
